Piper COMANCHE PA-24-180 Service Manual page 346

100 X
PIPER COMANCHE SERVICE MANUAL
\A
r
FIGURE 7A-4. PROPELLER INSTALLATION (HARTZELL) PA-24-260
7A-19. CUanng, Inpcadon And Repir.
The instructions for cleaning, mspection and repair of the PA-24-260 Harzell propeller are the same as
those given for the McCauley propeller used on the PA-24-250. (Refer to pragraph 7A-13.)
7A-20. Installarion Of Propeller. (PA-24-260) (Refer to Figure 7A4.)
a. Clean propeller and engine flanges.
b
Install spinner bulkhead (10) on starter nng gear (11) and torque bolts to specificauons given in
Table VIIA-I.
c. Observe the starter ring gear
to
make sure
it
is mounted properly on the engine crankshaft flange.
The crankshaft flange is stamped with an '0" mark and the starer ring gear is likewise identified by an
"0" mark. Upon installaon of the starter nng gear, the markings shall be mated to insure proper
installation.
d. Lubncate and install O-ring (9) in the propeller hub O-nng groove.
POWER PLANT
ISSUED: 8/18/72
2 C12