Piper COMANCHE PA-24-180 Service Manual page 141

SKETCH E
2 CONTROL TUBE
3 SQUARE TUBE SHAFT
11 CONTROL CABLE. STABILATOR
12 BOLT NUT ASSEMBLY
14 ROLLER ASSEMBLY
15 ROLLER
16 SAFETY WIRE
17 CAP BOLT
18 SEAL WASHER
19 BEARING
20 FITTING, CONTROL WHEEL SHAFT
21 COLLAR. CONTROL WHEEL SHAFT FRONT
22 COLLAR. CONTROL WHEEL SHAFT REAR
23 SLIDE BLOCK, SQUARE TUBE (NYLON)
24 COTTER PIN
25 SHIM WASHER
Figure 5-1. Control Column Installation (cont.)
SURFACE CONTROLS
REVISED: 4/10/81
1F21
PIPER COMANCHE SERVICE MANUAL