Piper COMANCHE PA-24-180 Service Manual page 181

PIPER COMANCHE SERVICE MANUAL
TABLE V-II. TROUBLESHOOTING CHART (SURFACE CONTROLS) (coOL)
Trouble I
Caus
Remedy
STABILATOR CONTROL SYSTEM
Lost motion between
control wheel
and subilator.
Cable tension too low.
Adjust cable tesion per
Table V-l.
Broken pulley.
Cables not in place on
pulleys.
Replace pulley.
[nsall cables correctly.
Restance to sabilaror
control movement.
System not lubricated
property.
Lubricate system. (Refer
to Lubrication
Char. Section II.)
Cable tension too high.
Puleys binding or rub-
bing.
Cables not in place on
pulleys.
Cables crossed or
routed incorrectv.
Adjust cable tension per
Table V-I.
Replace binding pulleys
and/or provide
clearance between
pulleys and brackes.
Insall cables correctly.
Check rouring of control
cables.
Incorrect scabilator
ravel.
Correct sabilaror
travel cannot
be obtained by
adjusting stop
bolts.
Stabilaror stop bolts
incorrectly adjusted.
Scabilator cables incor-
rectly ngged.
Adjust stop screws per
Paragraph 5-35
Rig cables in accor-
dance with Para-
graph 5-35.
SURFACE CONTROLS
ISSUED: 8/11872
1H13