Piper COMANCHE PA-24-180 Service Manual page 421

PIPER COMANCHE SERVICE MANUAL
DISTRIBUTER FINGEI
'FILED NOTCH
FIGURE 7B-10. FILED NOTCH ON CAM
e.
Turn rotor m direction of rottion until timing mark on drive member is between the outside
uimmg rmrk on the "L" side and indented dot on flange of housing. Lighdy flick adjustng knob of the
Holding Tool and allow rotor to come to rest. With rotor in this position, align timing Line of the Timing
Pointer with full regster position tminng mark. Recheck timing pointer poition by again flicking Holding
Tool. Pointer should come to rest ligned with the timing mark. Tighten adjustment knob of Holding Tool
until pressure is applied on housing flange prevenong rotor from rurning freely.
0
ROTOR HOLDING TOOL
TIMING POINTER
FIGURE 7B-11. INSTALLATION OF ROTOR HOLDING TOOL AND TIMING POINTER
POWER PLANT
ISSUED: 8/18/72
2 F15