Setting Up The Scanner; Preparing For Installation; Checking The Scanner Location - Ricoh IS450 Operating Instructions Manual

2. Setting up the Scanner

This chapter explains the preparations that are necessary in order to use the scanner.

Preparing for Installation

Checking the Scanner Location

Set up the scanner in a location that satisfies the following conditions:
Setup location
Warning:
Make sure the wall outlet is near the machine and easily
accessible so that in event of an emergency it can be
unplugged easily.
Caution:
Keep the machine away from humidity and dust. A fire or an
electric shock might occur.
Do not place the machine on an unstable or tilted surface. If it
topples over, it could cause injury.
Set up the scanner on a flat, stable surface.
The surface must be level to within 5mm ( 0.2") on all sides.
7