7. Push caliper mounting bracket inward and slip outer
brake pad past the edge to remove.
8. Remove the inner brake pad.
9. To remove the brake caliper: place a catch pan
under the brake caliper and remove the banjo bolt
retaining the brake line to the caliper.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
REAR CALIPER DISASSEMBLY /
INSPECTION
1. Remove brake pad adjustment set screw
2. Push upper pad retainer pin inward and slip brake
q
pads
past the edge and remove from the caliper.
w
3. Remove mount bracket
4. Using a hammer and a small punch, remove the
t
piston
from the caliper body
r
e
square O-rings
and
from the caliper body
5. Clean the caliper body, piston, and retaining bracket
a
with brake cleaner or alcohol.
NOTE
Be sure to clean caliper body seal grooves.
BRAKE SYSTEM
o
.
y
u
and dust boots
&
.
i
. Remove the
i
.
9.25
9