Grease Lubrication Points - Polaris RZR XP Turbo Service Manual

GREASE LUBRICATION POINTS

There are grease fittings on the front stabilizer bar mounts, rear stabilizer bar mounts, and on the prop shaft slip yoke.
Apply grease until all traces of water have been purged out at each of these areas.
ITEM METHOD
Front Stabilizer Bar
Grease the fitting on each side of
Bushings
the vehicle
Grease two fittings through the skid
Rear Stabilizer Bar
plate access holes on each side of
Bushings
the vehicle
Propshaft Yokes
Grease fittings
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
RECOMMENDED LUBE
Polaris All Season Grease
w
Polaris All Season Grease
e
Polaris Premium U-Joint
r
on the slip yoke
Grease
MAINTENANCE
FREQUENCY
Grease fittings every 500
miles (800 km); Grease
before long periods of
storage, and after
thoroughly washing or
submerging the vehicle
2.27
2