Polaris RZR XP Turbo Service Manual page 206

EFI / FUEL SYSTEM
10. Remove the two bolts
retaining the front of the seat base frame and two rear
i
bolts . Remove the seat base assembly from the
vehicle.
11. Remove the T-40 Torx screw
strap to the seat base frame. The strap does not need
to be removed from the vehicle.
12. Remove the Torx screws
retaining the block-off panel using a T40 Torx driver.
4.18
u
and two T40 Torx screws
a
retaining the fuel tank
s
and plastic rivets
o
13. Remove the Torx screws
14. Remove the cover panel and remove the fuel tank
vent line from the tank fitting.
Carefully bend back the cover panel by the fuel fill neck.
Do not bend the plastic so far as to crack the panel or
permanently deform the plastic.
d
15. Cut the three zip ties retaining the wiring to the edges
of the fuel tank.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
g
retaining the fuse box.
NOTE
© Copyright Polaris Industries Inc.