Brake Burnishing Procedure - Polaris RZR XP Turbo Service Manual

BRAKE SYSTEM

BRAKE BURNISHING PROCEDURE

It is required that a burnishing procedure be performed
after installation of new brake pads to extend service life
and reduce noise.
Start machine and slowly increase speed to 30 mph.
Gradually apply brakes to stop machine. Allow pads and
disc to cool sufficiently during the procedure. Do not
allow pads or disc to become hot or warping may result.
Repeat this procedure 10 times. Do not make more
than 3 stops per 1 mile (1.6 km).
9
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
9.23
© Copyright Polaris Industries Inc.