Doors - Polaris RZR XP Turbo Service Manual

1. Install the ROPS mid-hoop to the frame with M10 x 1.5 x 65 screws and nuts
2. Install hip bolsters onto the main frame with M8 x 1.25 x 20 bolts
3. Install ROPS rear hoop to frame with M10 x 1.25 x 55 bolts and nuts
4. Attach ROPS main to the mid ROPS hoop and front main frame with M10 x 1.5 x 45 screws
(54 Nm).
5. Install rear ROPS to rear ROPS hoop and rear frame with M10 x 1.5 x 45 screws
6. Install ROPS brace to ROPS mid hoop and ROPS rear hoop with M10 x 1.5 x 45 screws
Nm)
7. Install ROPS front to ROPS mains with M10 x 1.5 x 20 screws
8. Install visor panel on front ROPS with M10 x 1.25 x 20 bolts
DOORS XP
q
Door Panel
w
Door Frame
e
Latch Striker
r
Hinge Pin
t
Latch Release
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
o
. Torque to 17 ft-lb (23 Nm).
a
. Torque bolts to 14 ft-lb (19 Nm)
i
. Torque to 40 ft-lb (54 Nm)
i
. Torque to 40 ft-lb (54 Nm)
i
. Torque to 40 ft-lb (54 Nm)
s
. Torque to 8 ft-lb (11 Nm)
y
Latch
u
Hinge Screws
8 ft-lb (11 Nm)
i
Door Panel Screws
8 ft-lb (11 Nm)
o
Door Latch Screws
8 ft-lb (11 Nm)
a
Striker Screws
8 ft-lb (11 Nm)
BODY / FRAME
i
. Torque to 40 ft-lb
i
. Torque to 40 ft-lb (54
10
10.5