Polaris RZR XP Turbo Service Manual page 110

ENGINE / COOLING SYSTEM
8. Remove the four fasteners
pipe to the turbocharger.
9. Remove the exhaust pipe from the chassis.
10. Remove the two hoses
boost control valve.
11. Remove the banjo bolt
and remove the oil drain hose
IMPORTANT
The oil line sealing washers MUST be replace any time
the oil line/fitting is removed. Use only the
recommended washers shown in the Polaris Electronic
Parts Catalog.
3.18
u
retaining the exhaust
o
from the turbo going to the
a
retaining the oil inlet hose
s
.
12. Remove the fasteners
the head pipe / turbo assembly and remove the
shields.
13. Remove the fasteners
mounting bracket.
14. Remove the lower rear turbo bracket fasteners
loosen the front fasteners
bracket towards the front of the vehicle.
The front fasteners only need to be loosened to allow
the bracket to pivot towards the front of the vehicle for
turbo removal.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
d
retaining the heat shields to
f
retaining the turbo to the
h
. Pivot the top of the
NOTE
© Copyright Polaris Industries Inc.
g
and