Polaris RZR XP Turbo Service Manual page 268

TRANSMISSION
13. Remove two hoses going to the charge air cooler and
move the hoses towards the front of the vehicle.
14. Remove the thermostat housing hose
l
water pump hose .
15. Disconnect stator harness and disconnect the
harness retainer from the engine mount.
16. Disconnect the fuel supply and return hoses at the
fuel rail.
17. Disconnect TBAP, both TMAP sensors, CPS, coolant
temp sensor, Trans switch, speed sensor, injectors,
ETC.
6.6
18. Remove zip ties retaining fuel lines and harnesses to
intake manifold.
k
and the
19. Loosen and remove clamps
manifold to engine. Remove lower manifold mounting
2)
bolt
20. Remove intake manifold and throttle body as
assembly.
21. Disconnect the starter wiring.
22. Remove PVT hoses and outer cover.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
(to trans mount bracket).
© Copyright Polaris Industries Inc.
1 (
retaining intake