Polaris RZR XP Turbo Service Manual page 275

1. Using the Snorkel Tube Tool and two of the coupler
bolts to hold the coupler, remove the front output
q
shaft coupler nut and washers
Snorkel Tube Tool:
PU-51862
2. Use the snorkel tube tool to remove the snorkel tube
and front output shaft as an assembly.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
3. Extract the snorkel shaft seal
o
w
.
in to slowly pull the seal out.
e
r
t
y
u
i
4. Once the three snap rings
an arbor press to remove the snorkel tube and other
components from the shaft.
Support the end face of the gear teeth when pushing
the shaft through or damage to the gear teeth may
g
by drilling a small pilot hole and threading a screw
o
Snap Ring Snorkel Tube
a
Thrust Washer Bearing
s
Bearing Snap Ring
d
Ring Gear Thrust Washer
f
Front Output Shaft Snap Ring
g
O-Ring Seal
es
&
CAUTION
occur.
TRANSMISSION
from the snorkel tube
6
f
are removed, use
6.13