BRAKES
REAR CALIPER
REMOVAL/INSPECTION
1. Clean caliper area before removal.
2. Remove hand brake (inner) and auxiliary brake
(outer) lines. Place a container to catch brake
fluid draining from brake lines.
3. Remove the two caliper bolts and the caliper.
4. Remove the slide bolt snap rings (A), the slide
pins (B), the bracket pad (C), and the brake pads
(D).
9.18
5. Remove the anvil bolts and separate caliper
Remove Lines
Remove
Bolts
6. Remove seals and O-rings. Clean the O-ring
7. Clean disc, caliper body, and pistons with brake
8. Remove the slide bolt bushings. Inspect the
Caliper
D
A
halves and remove pistons with piston pliers.
Caliper
Seal
Piston & O--rings
grooves.
cleaner or alcohol.
bushings and O--rings and replace if necessary.
Bushing
C
B
Anvil Bolts
O--ring