BODY ASSEMBLY VIEWS
CAB FRAME ASSEMBLY XP
Finger tighten all components until cab frame is completely assembled on vehicle then tighten to specification.
1. Install hip bolster and secure the bottom mount with M8 x 1.24 x 20 bolts. Torque bolts to 14 ft-lb (19 Nm).
2. Install ROPS to hip bolster and frame with M10 x 1.25 x 55 bolts and nuts. Tighten fasteners to 40 ft-lb (54 Nm)
3. Install the front ROPS to the frame with M10 x 1.5 x 45 screws and nuts. Install front ROPS to ROPS hoop with
M10 x 1.5 x 20 screws. Torque fasteners to 40 ft-lb (54 Nm).
4. Install rear ROPS to the ROPS hoop with M10 x 1.5 x 25 screws. Install rear ROPS to frame with M10 x 1.5 x 45
screws and nuts. Torque fasteners to 40 ft-lb (54 Nm).
5. Install visor on front ROPS with M10 x 1.25 x 20 bolts. Torque bolts to 8 ft-lb (11 Nm)
q
Cab Frame Fasteners 40 ft-lb (54 Nm)
w
Cab Frame Extenders
e
Hip Bolster Lower Fasteners 14 ft-lb (19 Nm)
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
NOTE
r
Visor Screws 8 ft-lb (11 Nm)
t
Front ROPS Bracket 40 ft-lb (54 Nm)
y
Hip Bolster
BODY / FRAME
10
10.3