Cooling System Bleeding; Engine Cooling System Bleeding - Polaris RZR XP Turbo Service Manual

MAINTENANCE
8. Elevate the front of the vehicle at approx. 2 feet (60
e
cm) .
9. Safely secure the vehicle.
10. Slowly fill the cooling system at the coolant reservoir
with 50/50 extended life coolant. Refer to Chapter 1 –
General Specifications for approximate coolant
system capacity.
Elevating the unit will help reduce any air pockets in the
system when filling with coolant.
11. Fill the reservoir to the FULL COLD line.
12. Proceed to bleed the cooling system. See Cooling
System Bleeding, page 2.38.

COOLING SYSTEM BLEEDING

ENGINE COOLING SYSTEM BLEEDING

1. Remove the hood panel.
2.38
NOTE
2. Remove the coolant pressure cap
w
the FULL COLD line
3. Elevate the front of the vehicle at approx. 2 feet (60
e
cm) .
4. Remove the cargo box engine access panel.
5. Place a drain pan below the engine to catch any
coolant out of the engine bleed hole.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
q
. Fill coolant to
on the coolant tank.
© Copyright Polaris Industries Inc.