Transmission Installation - Polaris RZR XP Turbo Service Manual

23. Remove secondary clutch, belt and primary clutch.
24. Support the bottom side of the engine with wood
blocks or from the top side with an engine lift.
25. Remove the three allen screws
cover to engine.
2@
26. Remove three bolts retaining inner cover to engine
(over crank seal).
27. Remove fasteners retaining
transmission.
28. Remove fasteners retaining inner cover to engine/
trans joint. Discard PVT inner cover o-ring around the
crankshaft snout.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
29. Remove the rear transmission isolator fasteners
30. Remove the three fasteners
isolator to the frame bracket.
2!
retaining inner
31. Remove the transmission out the driver's side of the
vehicle.

TRANSMISSION INSTALLATION

inner cover to
1. Install transmission into the chassis through the
driver's side.
2. Install rear transmission mount to the frame bracket.
Torque fasteners to specification.
3. Install
transmission bracket and isolator. Torque fasteners to
specification.
TRANSMISSION
2 $
retaining the rear
TORQUE
Rear Transmission Mount Fasteners:
22 ft-lb (30 Nm)
transmission isolator bolt
TORQUE
Rear Transmission Isolator Fasteners:
33 ft-lb (45 Nm)
2#
.
6
through the
6.7