Polaris RZR XP Turbo Service Manual page 181

f
21. Lubricate the rack on the tensioner with white
lithium grease.
22. Remove the spring retainer bolt and push the adjuster
all the way in.
23. Using a new gasket, install the cam chain tensioner
g
into the cylinder and torque mounting bolts
specification.
TORQUE
Cam Chain Tensioner:
7 ft-lb (10 Nm)
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM
24. Install the tensioner spring
l
retainer bolt . Torque retainer bolt to specification.
Tensioner Spring Retainer:
The tensioner will automatically adjust to the proper
tension once the spring and retainer are installed. No
further adjustment is required.
25. Torque the camshaft carriers bolts in sequence to
specification.
Camshaft Carrier Bolts:
h
to
26. Rotate crankshaft through two revolutions and verify
camshaft timing is correct.
j k
, washer
TORQUE
12 ft-lb (16 Nm)
NOTE
TORQUE
7 ft-lb (10 Nm)
, and
3
3.89