Polaris RZR XP Turbo Service Manual page 208

EFI / FUEL SYSTEM
TORQUE
Seat Frame Fasteners:
M8 Bolts: 14 ft-lb (19 Nm)
M10 Bolts: 30 ft-lb (41 Nm)
8. Install the push rivets and Torx screws retaining the
passenger side rocker panel
specification.
TORQUE
Body Screws:
8 ft-lb (11 Nm)
9. Install the push rivets and Torx screws retaining the
rear fender flair and rear fender. Torque fasteners to
specification.
TORQUE
Body Screws:
8 ft-lb (11 Nm)
10. Install the shift linkage to the shifter. Install the shift
cable to the shifter bracket and tighten the outer jam
nut. Torque jam nut to specification.
4.20
y
. Torque fasteners to
TORQUE
Shift Cable Jam Nut:
16 ft-lb (22 Nm)
11. Install the plastic rivets
ing the center console.
specification.
TORQUE
Body Screws:
8 ft-lb (11 Nm)
12. Connect the fuel pump electrical harness.
13. Connect the fuel supply line
the fuel pump.
14. Install the battery into the vehicle. Torque fasteners to
specification.
TORQUE
Battery Bracket Fastener:
24 in-lbs (3 Nm)
Battery Terminal Fasteners:
60 in-lbs (7 Nm)
15. Install the seats.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
e r
and Torx screws retain-
Torque fasteners
q
and return line
© Copyright Polaris Industries Inc.
to
w
to