Polaris RZR XP Turbo Service Manual page 266

TRANSMISSION
4. Adjust the shift cable so there is the about the same
amount of cable travel when shifting slightly past
HIGH gear than when shifting to PARK.
5. Thread the upper or lower jam nut as required to
obtain proper cable adjustment.
This procedure may require a few attempts to obtain
the proper adjustment.
6. Once the proper adjustment is obtained, place the
shift cable and upper jam nut into the mount. Tighten
the lower jam nut against the mount.
TORQUE
Shift Cable Jam Nuts:
16 ft-lb (22 Nm)
7. Start engine and shift through all gears to ensure the
shift cable is properly adjusted. If transmission still
ratchets after cable adjustment, the transmission will
require service.
6.4
NOTE
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.