Drive Clutch Assembly - Polaris RZR XP Turbo Service Manual

13. Remove the roller bearing
both sides of the bearing. If the outer surface is worn
off the bushings, they should be replaced.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
s d
and the bushings on

DRIVE CLUTCH ASSEMBLY

s
1. Install the roller bearing
and install on the clutch shaft.
2. Install the moveable sheave
i
3. Install the spider onto the clutch shaft.
4. Place the drive clutch holding tool
install the drive clutch on the tool. Install the clutch
y
spider nut tool on the spider nut sleeve
torque the nut to specification.
Spider Nut Removal tool:
PU-50578
PVT SYSTEM
d
between the bushings
o
onto the shaft.
5
t
in a vise and
u
and
5.11