Polaris RZR XP Turbo Service Manual page 108

ENGINE / COOLING SYSTEM
3. Disconnect and remove the oxygen sensor
4. Remove the three fasteners
the exhaust pipe.
5. Remove two fasteners
shield above O2 sensor.
3.16
w
.
e
retaining the muffler to
r
retaining the engine heat
6. Remove the four fasteners
shield above the valve cover.
Front fasteners are plastic rivets and rear fasteners are
bolt/washer/nut.
7. Remove the two fasteners
to the exhaust pipe / turbo joint.
8. Remove the four fasteners
pipe to the turbocharger.
9. Remove the exhaust pipe from the chassis.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
t
retaining the heat
NOTE
y
retaining the heat shield
u
retaining the exhaust
© Copyright Polaris Industries Inc.