Driven Clutch Bushing Service - Polaris Trail Blazer Service Manual

CLUTCH

Driven Clutch Bushing Service

Driven Clutch Moveable Sheave -
Bushing Removal
NOTE: Bushings are installed at the factory using Loc-
tite. In order to remove the bushing it will be necessary
to apply heat.
1. Install main adapter (Item 8) onto puller.
2. Insert adapter reducer (Item 9) onto puller, sliding it
inside the main adapter..
3. Remove ramp buttons from moveable sheave.
4. Using a hand held propane torch, apply heat
directly on bushing until tiny smoke tailings appear.
CAUTION:
Clutch components will be hot! In order to avoid serious
burns, wear some type of insulated gloves for the rest of
the removal process.
4/99 6.34
Main Adapter
Adapter
Reducer
Polaris Sales Inc.