Engine Break-In Period; Engine Lubrication Specifications - Polaris RZR XP 1000 2014 Service Manual

ENGINE BREAK-IN PERIOD

The break-in period consists of the first 25 hours of
operation, or the time it takes to use 15 gallons (57 liters)
of fuel. Careful treatment of a new engine and drive
components will result in more efficient performance and
longer life for these components.
CAUTION
Use only Polaris PS-4 or PS-4 Extreme Duty Synthetic
4-Cycle Engine Oil.Never substitute or mix oil brands.
Serious engine damage and voiding of warranty can
result.Do not operate at full throttle or high speeds for
extended periods during the first three hours of use.
Excessive heat can build up and cause damage to
close fitted engine parts.
1. Fill fuel tank with unleaded fuel which has a minimum
pump octane number of 87 = (R + M)/2.
2. Refer to Engine Oil Level, page 2.10. Check oil level
indicated on dipstick. Add oil if necessary.
3. Drive slowly at first to gradually bring engine up to
operating temperature.
4. Vary throttle positions. Do not operate at sustained
idle or sustained high speed.
5. Perform regular checks on fluid levels, controls and
all important bolt torques.
6. Change oil and oil filter after 25 hour break-in period.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING SYSTEM

ENGINE LUBRICATION SPECIFICATIONS

FLUID CAPACITY
Oil Capacity *
3.0 qt (2.8 L)
Oil Type
PS-4 Full Synthetic 5W-50
2876244 (quart)
2876245 (gallon)
(-35° F to 100° F)
PS-4 Extreme Duty
2878920 (quart)
2878919 (gallon)
Oil Filter Wrench
PU-50105 or 2.5" (64 mm)
Oil Filter
PN 2540086
Oil Pressure Minimum Specification (using Polaris
engine oil at operating temperature)
10 PSI @ 1200 RPM
40 PSI @ 7000 RPM
*Additional oil may be required after complete
engine disassembly. Check level after filling and add
oil as needed.
3
3.35