3.
Remove 1 screw securing the Fan retainer (stopper) and remove the fan to the left
while feeding the cable through the printer from the right side.
2
1
Reinstallation Notes
Note
If not already done during removal, loosen the screws securing the Laser
Assembly sufficiently to route the fan cable under the laser.
Install the Sub Fan with the label facing in to ensure proper air flow.
Exit Roller Assembly (PL 9.3.21) Transport Roller
Assembly (PL9.3.24)
1.
Remove the Print Cartridge (page 8-4) and protect it from light.
2.
Remove the Top Cover Assembly (page 8-9).
Service Parts Disassembly
Stopper
1.
Sub Fan
2.
s3450-198
8-25