Status Code List (3610) - Xerox Phaser 3610 Service Manual

Status Code List (3610)

Note: Be aware that the error code that shows up on the UI for some errors does not have the
same chain link code that will be displayed in the Error History report.
Note: When the LCD Message column displays '-', 'xxxxxxxx', the LCD doesn't display any
messages (it displays only the Status code), the error is dealt with internally. When the LCD
Message column displays 'xxxxxxxx Duplicate IPv6 Add....', the LCD doesn't display any
messages (displays only the Status code).
Status
Code LCD Message
(3610)
Reseat Feeder
Power Off/On
004-310
Error 004-310
Power Off/On
Insert Fuser
010-317
010-317
Insert Fuser
Power Off/On
Fuser Error
Power Off/On
010-397
Error 010-397
Power Off/On
Reseat Wi-Fi
Contact Admin.
016-338
Error 016-338
Power Off/On
MRAM Error
Power Off/On
016-359
Error 016-359
Power Off/On
Error 016-369
016-369
Power Off/On
Name/Description of Error
<IOT Option Feeder I/F Failure>
Cause:
The Option Feeder communication failure is
detected.
<FUSING ASSEMBLY Detached>
Cause:
FUSING ASSEMBLY detached is detected.
<FUSING ASSEMBLY Failure>
Cause:
The operation error of FUSING ASSEMBLY
(Temperature anomaly error etc.) is detected.
<Wireless Option Error>
Cause:
Wireless Driver starting error.
<MRAM Fail>
Cause:
MRAM Device Error.
<UI Panel - ESS Communication Fail>
Cause:
Communication Fail with a UI Panel and ESS F/W.
Phaser 3610, WorkCentre 3615 Service Manual
Troubleshooting
FIP
FIP 1. 01
FIP 1. 04
FIP 1. 04
FIP 1. 08
FIP 1. 09
FIP 1. 10
2-19