Xerox Phaser 3610 Service Manual page 476

Service Parts Disassembly
3. If installing a new Rear Cover Assembly, transfer the Transfer Roller Assembly from the old
Assembly.
Replacement
1. Re-install the cover assembly. (Figure 2)
a. Connect P/J 2401
b. Install the boss on the right side of the cover, and make sure the ground spring engages the
hook on the chassis.
2. Re-engage the left side boss.
3. Replace in reverse order.
4-14 Phaser 3610, WorkCentre 3615 Service Manual
b)
a)
Figure 2
s3610-160