Xerox Phaser 3610 Service Manual page 488

Service Parts Disassembly
REP 1.15 Top Cover Assembly (3615)
PL 1.2 Covers (3615)
Removal
WARNING: Allow the Fusing Assembly to cool before servicing the product.
1. Remove (REP 1.14 Right Inner Cover
2. Remove 2 screws (silver, tapping, 8mm) to remove the Top Cover Assembly. (Figure 1)
Replacement
1. Hold the actuator so it will fit through the slot as you position the cover for replacement.
2. Replace in reverse order.
4-26 Phaser 3610, WorkCentre 3615 Service Manual
(3615)).
Figure 1
s3610-203