Xerox Phaser 3610 Service Manual page 603

Using the Parts List
• ID No.: The callout number from the exploded part diagram.
• Name/ Description: The name of the part to be ordered and the number of parts supplied per
order.
• Part Number: The material part number used to order that specific part.
• A black triangle preceding a number followed by a parenthetical statement in an illustrated parts
list means the item is a parent assembly, made up of the individual parts called out in
parentheses.
• The notation "with X~Y" following a part name indicates an assembly that is made up of
components X through Y. For example, "1 (with 2~4)" means part 1 consists of part 2, part 3, and
part 4.
• The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that connector Jack 1 is
attached to one end of the wire harness and connector J2 is attached to the other end that is
plugged into P2.
Note: Only parts showing part numbers are available for ordering by support. Parts not showing
part numbers are available on the parent assembly.
Phaser 3610, WorkCentre 3615 Service Manual
Parts List
5-5