FIP 1. 168
031-599 FTP Scan Rename Command Fail
Cause:
RNFR command or RNTO command failed.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check rename access right to the file. Check that the server supports FTP rename command.
2. Take corrective actions at the host side.
FIP 1. 169
033-501 Fax Codec Error
Cause:
Cancel Codec processing due to error of read part during manual send.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace the following parts in sequence.
•
(REP 5.1 ESS
•
REP 6.1 IIT Assembly
(
PWB)
)
Phaser 3610, WorkCentre 3615 Service Manual 2-203
Troubleshooting