Introduction; Flow Of Troubleshooting - Xerox Phaser 3610 Service Manual

Troubleshooting

Introduction

This chapter describes error messages displayed on the Control Panel or listed on the Error History
page, Service Diagnostics used to test system operation and troubleshooting procedures to correct
problems.

Flow of Troubleshooting

The fault repair operation proceeds in the following flow:
Check Installation Status
Check the Problem Status
General
Wiring Data
Principle of Operation
Perform FIP
Reference
Information
Check if the fault is repaired
End
2-2 Phaser 3610, WorkCentre 3615 Service Manual