Xerox Phaser 3610 Service Manual page 164

Troubleshooting
Status
Code
(3615)
071-920 -
071-921 -
072-100 -
072-101 -
072-102 -
Tray 2 Error
Power Off/On the Printer.
If this failure occurs again,
072-211
please contact customer sup-
port.
Code:xxxxxxxxh
073-100 -
2-106 Phaser 3610, WorkCentre 3615 Service Manual
LCD Display
072-211
Name/Description of Error
<Waiting to Print Side 2 Load Printed
Pages into the NNN>
Cause:
Waiting for side 2 to be set for manual
duplex print (Tray).
<Manual Duplex Print>
Cause:
Waiting for Set key to be pressed after
setting side 2 for manual duplex print
(Tray).
<IOT Tray2 Misfeed Jam>
Cause:
After the Tray 2 Feed Clutch turned
ON, the Tray 2 Path Sensor did not
turn ON within the specified time.
<IOT Path 2 SNS On Jam>
Cause:
The Tray 2 Path Sensor did not turn
ON within the specified time after the
Tray 3 Path Sensor turned ON.
<IOT Option Regi On Jam>
Cause:
After the Tray 2 Path Sensor turned
ON, the Regi. Sensor did not turn ON
within the specified time.
<Feeder 2 Error>
Cause:
IOT Option Feeder2 Failure.
<IOT Tray 3 Misfeed Jam>
Cause:
After the Tray 3 Feed Clutch turned
ON, the Tray 3 Path Sensor did not
turn ON within the specified time.
FIP
FIP 1. 274
FIP 1. 275
FIP 1. 276
FIP 1. 277
FIP 1. 278
FIP 1. 279
FIP 1. 276