Xerox Phaser 3610 Service Manual page 169

Status
Code LCD Display
(3615)
Device Memory Error
Power Off/On the Printer.
116-313 If this failure occurs again,
please contact customer sup-
port.
MAC Address Error
Power Off/On the Printer.
116-314 If this failure occurs again,
please contact customer sup-
port.
Controller Memory RAM Error
Power Off/On the Printer.
116-315 If this failure occurs again,
please contact customer sup-
port.
Controller ROM Error
Power Off/On the Printer.
116-317 If this failure occurs again,
please contact customer sup-
port.
Controller NVRAM Error
Power Off/On the Printer.
116-323 If this failure occurs again,
please contact customer sup-
port.
Controller Error
Power Off/On the Printer.
116-324 If this failure occurs again,
please contact customer sup-
port.
Controller NVRAM Error
Power Off/On the Printer.
116-326 If this failure occurs again,
please contact customer sup-
port.
Name/Description of Error
116-313
<Encryption Setting Error>
Cause:
Encryption setting mismatch.
<MAC Address Error>
Cause:
On Board Network MAC Address
Checksum Error.
<ESS On Board RAM W/R Check Fail>
Cause:
Detected by On Board RAM W/R Check
at the time of initialization.
<ESS ROM Check (Main) Fail>
Cause:
Main Program ROM checksum error.
<ESS NVRAM1 W/R Check Fail>
Cause:
Detected by master NVRAM W/R
check.
<ESS Illegal Exception>
Cause:
CPU illegal exception.
ESS NVRAM2 W/R Check Fail
Cause:
Detected by master NVRAM W/R
check.
Phaser 3610, WorkCentre 3615 Service Manual 2-111
Troubleshooting
FIP
FIP 1. 298
FIP 1. 299
FIP 1. 300
FIP 1. 302
FIP 1. 303
FIP 1. 303
FIP 1. 304