Xerox Phaser 3610 Service Manual page 589

REP 7.7 Feed Clutch Assembly
PL 7.1 Tray 1/Optional Tray 550-Sheet Feeder (1/4)
Removal
1. Remove the Tray from the 550-Sheet Feeder.
2. Remove (REP 7.1 550-Sheet
3. Remove (REP 7.2 Left Side
4. Remove (REP 7.6 Drive
5. Remove the Feed Clutch Assembly. (FIgure 1)
a. Disconnect P/J4201from the Feed Clutch Assembly,
b. Release the harness from the harness guide.
c. Remove the E-ring that secures the Feed Clutch Assembly to the shaft.
c)
Replacement
1. Replace in reverse order.
Feeder).
Cover)
Assembly).
a)
b)
P/J4201
Figure 1
Phaser 3610, WorkCentre 3615 Service Manual 4-127
Service Parts Disassembly
s3610-116