FIP 1. 172
033-510 Fax Codec Error
Cause:
In JBIG data decode, error in the number of decode line in one stripe.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Turn the power Off and On to check that the error recurs.
2. Update to the latest F/W.
3. If the problem cannot be solved, replace the following parts in sequence.
•
(REP 5.4 Fax
•
(REP 5.1 ESS
FIP 1. 173
033-511 Fax Code Error
Cause:
Result of MH, HR, MMR receive decode is 0Line.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the receiving side fax. Send the fax data to a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•
(REP 5.4 Fax
•
(REP 5.1 ESS
PWB)
PWB)
PWB)
PWB)
Phaser 3610, WorkCentre 3615 Service Manual 2-205
Troubleshooting