Xerox Phaser 3610 Service Manual page 506

Service Parts Disassembly
3. Remove the Feeder Assembly. (Figure 2)
a. Remove the E-ring that secures the Feed Clutch to the Transport Assembly,
b. Remove, but do not disconnect the clutch, and remove the bearing.
c. Remove the One-Way Clutch.
d. Remove the the Feed Shaft with the Feed Gear.
e. Remove the Nudger Bearing that secures the Feeder Assembly to the Transport.
f. Remove the Feeder Assembly.
4-44 Phaser 3610, WorkCentre 3615 Service Manual
c)
Figure 2
d)
e)
b)
a)
s3610-026