FIP 1. 212
033-775 FAX RX Encode Output Buffer Over
Cause:
In FAX receive, JBIG encode output buffer overflow.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the sending side fax machine or retry sending by lowering the resolution setting.
2. Update to the latest F/W.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•
(REP 5.4 Fax
•
(REP 5.1 ESS
FIP 1. 213
033-776 SCAN Encode Output Buffer Over
Cause:
In FAX scan and D-FAX scan, JBIG encode output buffer overflow.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the resolution setting.
2. Retry sending by lowering the resolution setting.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•
(REP 5.4 Fax
•
(REP 5.1 ESS
PWB)
PWB)
PWB)
PWB)
Phaser 3610, WorkCentre 3615 Service Manual 2-225
Troubleshooting