Xerox Phaser 3610 Service Manual page 495

10. Prepare the MCU PWB. (Figure 2)
a. Release 4 clips that secure the Top Frame Assembly to remove it from the chassis.
b. Release 3 clips that secure the MCU PWB cover to remove it from the chassis.
c. Disconnect P/J12 and P/J14 from the MCU PWB, then release the harness from the harness
guide.
P/J12
c)
P/J14
b)
Figure 2
Phaser 3610, WorkCentre 3615 Service Manual
Service Parts Disassembly
a)
4-33