Xerox Phaser 3610 Service Manual page 285

FIP 1. 216
033-782 NSS/DCS Function disagreement
Cause:
Received NSS/DCS function disagrees with capability of own terminal.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Set the Modem Speed correctly.
2. Update to the latest F/W.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
• (REP 5.4 Fax
• (REP 5.1 ESS
FIP 1. 217
033-784 Fax Codec Error
Cause:
In FAX receive, JBIG decode output buffer overflow.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the sending side fax machine or retry sending by lowering the resolution setting.
2. Update to the latest F/W.
3. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
• (REP 5.4 Fax
• (REP 5.1 ESS
PWB)
PWB)
PWB)
PWB)
Phaser 3610, WorkCentre 3615 Service Manual 2-227
Troubleshooting