Xerox Phaser 3610 Service Manual page 168

Troubleshooting
Status
Code
(3615)
Low Toner Density
093-922 Remove Toner, Shake Cartridge
and Reinstall.
Toner Chip Error
Open the Front Cover.
093-925
Then reseat/replace the Car-
tridge.
Invalid Toner Cartridge 093-
926
093-926 Open the Front Cover.
Then reseat/replace the Toner
Cartridge.
Toner Type Error
Open the Front Cover.
093-928
Then reseat/replace the Car-
tridge.
Toner Empty 093-933
Open the Front Cover.
093-933
Then replace the Toner Car-
tridge.
Toner Cartridge Missing 093-
973
093-973
Open the Front Cover.
Then insert the Toner Cartridge.
USB Host Error
Power Off/On the Printer.
116-210 If this failure occurs again,
please contact customer sup-
port.
Device Memory Error
Power Off/On the Printer.
116-312 If this failure occurs again,
please contact customer sup-
port.
2-110 Phaser 3610, WorkCentre 3615 Service Manual
LCD Display
093-922
093-925
093-928
116-210
116-312
Name/Description of Error
<Toner Low Density>
Cause:
Low concentration of the Toner was
detected.
<Toner CRUM Error>
Cause:
The Toner CRUM error was detected.
<Toner CRUM ID Error>
Cause:
The Toner CRUM ID error was
detected.
<Toner Type Error>
Cause:
The Toner Type Error was detected.
<Toner Life Over>
Cause:
It was detected that the Toner Car-
tridge needed to be replaced soon.
<Toner Detached>
Cause:
It was detected that the Toner CRUM
is not at the specified position. (Loose
CRUM)
<USB Host Error>
Cause:
Fatal error of USB Host driver.
<Encryption Key Error>
Cause:
Encryption key mismatch.
FIP
FIP 1. 294
FIP 1. 295
FIP 1. 295
FIP 1. 295
FIP 1. 296
FIP 1. 295
FIP 1. 297
FIP 1. 298