Xerox Phaser 3610 Service Manual page 292

Troubleshooting
FIP 1. 230
035-704 Not Send Ability
Cause:
Remote device has no ability to send.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the sending side fax. Receive the fax data from a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
• (REP 5.4 Fax
• (REP 5.1 ESS
FIP 1. 231
035-705 DCS/NSS Resend Over
Cause:
DCS/NSS resend over.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the sending side fax. Receive the fax data from a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
• (REP 5.4 Fax
• (REP 5.1 ESS
2-234 Phaser 3610, WorkCentre 3615 Service Manual
PWB)
PWB)
PWB)
PWB)