Xerox Phaser 3610 Service Manual page 747

Hide thumbs Also See for Phaser 3610:

Table of Contents

This mode is called as "Energy Saving: Step 2" for BAM(Blue Angel Mark) standard.

When no job is executed for a certain period of time, the machine enters this mode to reduce the

standby electricity consumption.

The shift time from the Standby mode to Sleep mode can be changed from the operator panel (Setting

range: 1-60 min).

The factory default is 1 min.

The conditions that Sleep mode to Ready mode:

Pressing "Energy Saver button" on the operator panel.

Receiving a print job.

Report printing directions from CWIS.

(3615) Receiving a FAX Job.

(3615) Receiving a direct FAX job.

(3615) Start sending or polling data at the communication, if start time specified by the

Deep Sleep Mode

This mode is called as "Energy Saving: Step 3" for BAM(Blue Angel Mark) standard.

After the Sleep mode has continued for a certain period of time, the machine enters the Deep Sleep

Mode to save more power consumption.

The shift time from the Sleep mode to the Deep Sleep mode can be changed from the operator panel.

There is not defined Deep Sleep Mode and its menu.The shift time from the Sleep mode to the Deep

Sleep mode is fixed for 1min.

The Deep Sleep mode is cancelled by:

Pressing Energy Saver button on the operator panel

Receiving a print job

Indicate Report Print from CWIS

Start sending or polling data at a communication start time specified by the operator

(3615) Receiving a FAX Job.

(3615) Receiving a direct FAX job.

Phaser 3610, WorkCentre 3615 Service Manual

Specifications

Show Quick Links

Table of Contents

Workcentre 3615