FIP 1. 244
035-739 T5 Time Out
Cause:
T5 Time Out.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the sending side fax. Receive the fax data from a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•
(REP 5.4 Fax
•
(REP 5.1 ESS
FIP 1. 245
035-740 ECM Send EOR-Q Send
Cause:
IN ECM send, send EOR-Q.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the sending side fax. Receive the fax data from a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
•
(REP 5.4 Fax
•
(REP 5.1 ESS
PWB)
PWB)
PWB)
PWB)
Phaser 3610, WorkCentre 3615 Service Manual 2-241
Troubleshooting