Introduction - Xerox Phaser 3610 Service Manual

Overview

Introduction

The Phaser 3610, WorkCentre 3615 laser printers have a single-pass laser-design architecture based on
the electrophotographic recording principle, which offers mono print speed at 30/30 ppm, and
resolutions up to 1200 x 1200 dots-per-inch (dpi). The printers supports Adobe PostScript 3 and PCL6,
USB 2.0, and 10/100 Base-TX Ethernet. The Phaser 3610, WorkCentre 3615 printers provides a
standard 150-Sheet Bypass Tray and a standard 250-Sheet Tray 1. The Bypass Tray supports specialty
media, card stock, and envelopes. The standard paper input is 400 sheets and the maximum input with
optional Trays 2, 3, and 4 is 2,050 sheets. The Output Tray holds 300 sheets facedown.
The printer options add memory, paper capacity, and functionality. Memory upgrades are available to
increase the standard RAM from 1 GB up to 2 GB maximum. A 40 GB Hard Disk Drive and a 550-Sheet
Feeder are available as an option. Auto-duplexing is available and no tools are required to install the
Duplex Unit.
Phaser 3610, WorkCentre 3615 Service Manual 1-11