Xerox Phaser 3610 Service Manual page 289

FIP 1. 224
034-508 Command Refuse Signal Send
Cause:
Send command refuse signal to stop communication.
The sender discontinued the communication.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time. No action is required.
FIP 1. 225
034-515 DIS DCS Illegal Command Receive
Cause:
Receive illegal command such as DIS, DCS receive from calling terminal in spite of having no
ability to receive.
Solution:
The machine will recover after the OK or Close button is pressed or message is displayed for
specified time.
If the error persists:
1. Check the telephone line connection. Reconnect the telephone line connector.
2. Check the sending side fax. Receive the fax data from a good fax machine.
3. Update to the latest F/W.
4. Ensure that the error is replicated after the printer is powered Off and then On, and then
replace the following parts in sequence.
• (REP 5.4 Fax
• (REP 5.1 ESS
PWB)
PWB)
Phaser 3610, WorkCentre 3615 Service Manual 2-231
Troubleshooting