Native Instruments MASCHINE MIKRO MK2 Manual page 45

Setting or command
PLUG-IN
DEFAULT CONFIG
RESCAN
CLEAR
SELECT
Scan at startup
64 BIT / 32 BIT Section
Displays 32-bit/64-bit plug-ins that are identified by MASCHINE but cannot be used in the
current bit mode.
To check which bit mode you are currently running, open the About screen from MA-
SCHINE's Help
Description
Lists all available plug-ins from the directories specified in the LOCATIONS sec-
tion (see above). This includes all enabled or disabled 32-bit plug-ins, when MA-
SCHINE is running in 32-bit mode or otherwise all enabled or disabled 64-bit
plug-ins, when MASCHINE is running in 64-bit mode.
For each plug-in you can set a default Module preset, which will be loaded with
this plug-in when you load it from the Module list on the controller or the Module
menu of a Module slot. Use the
The default Module preset can also be set via the Module menu (Save As De-
fault...). If no default is set here, the parameters of this plug-in will be auto-map-
ped when loading it into a Module slot.
If you have changed the content of the selected directory (such as installed or re-
moved plug-ins), you should rescan your plug-in directories in order to keep the
list of available plug-ins up to date. Clicking
your plug-ins and allow you to automatically detect plug-ins that were added or
removed, or deselect any plug-ins that are not working correctly for any reason.
This removes the default Module preset for the selected plug-in.
This allows you to select a default Module preset for the selected plug-in, which
will be loaded with this plug-in when you load it from the Module list on the con-
troller or the Module menu of a Module slot..
Check this box to let MASCHINE automatically scan for new plug-ins on startup.
Please be aware these scans increase startup times. If you leave this box un-
checked, be sure to perform a manual scan using the
plug-ins are installed or plug-ins are removed.
menu and see the Mode section in the upper right.
SELECT button to set the default Module preset.
RESCAN will check the integrity of
RESCAN
MASCHINE MIKRO MK2 - Manual - 45
Basic Concepts
Preferences
button when new