Mute And Solo On The Hardware - Native Instruments MASCHINE MIKRO MK2 Manual

4.6.1

Mute and Solo on the Hardware

Soloing Sounds and Groups
1. Press SOLO and hold it.
Your controller switches to Solo mode.
2. Solo Sounds by pressing their pads, and Groups by pressing their Group buttons.
Instead of holding SOLO, you can also pin the Solo mode by pressing
You can then release SOLO: Your controller will stay in Solo mode until you press
again. See section
There are two more functions in Solo mode:
ALL ON (Button 3) turns all Sounds on.
▪
NONE (Button 4) turns all Sounds off in the selected Group.
▪
The Solo mode on the controller.
Muting Sounds and Groups
Mute works in the same way as Solo:
1. Hold MUTE.
Your controller switches to Mute mode.
2. Mute Sounds by pressing their pads, and Groups by pressing their Group buttons.
Instead of holding MUTE, you can also pin the Mute mode by pressing
You can then release MUTE: Your controller will stay in Mute mode until you press
again. See section
Like in Solo mode, there are two more functions in Mute mode:
ALL ON (Button 3) turns all Sounds on.
▪
↑2.2.8, Pinning a Mode for more info.
↑2.2.8, Pinning a Mode for more info.
Working with Sounds
SOLO + Button 1.
SOLO
MUTE + Button 1.
MUTE
MASCHINE MIKRO MK2 - Manual - 127
Mute and Solo