Copy And Paste Events/Notes; Nudge - Native Instruments MASCHINE MIKRO MK2 Manual

Erasing Events or Notes while Playing
If the sequencer is currently playing, you can selectively erase events/notes at the play posi-
tion:
While the Pattern is playing, hold
►
events for that Sound (if pads are in Group mode) or the notes at that pitch for the se-
lected Sound (if pads are in Keyboard mode) that are located at the current play position.
As long as you hold the pad, the corresponding events/notes are deleted as the play posi-
→
tion moves on.
You can use this to selectively erase notes at a particular place in the Pattern.
This might take some time getting used to, especially when the tempo is very fast, but you
can always use undo/redo
before.
6.2.3

Copy and Paste Events/Notes

You can also copy and paste selected events/notes:
1. To copy the selected events/notes, press
2. To paste them, press
The events/notes will be pasted according to the Step Grid resolution, shifted one step to
→
the right. If nothing is selected, all event/notes in the Pattern will be affected.
You can also copy events/notes from one Pattern to another: to do this, copy the selected
events/notes, select the Pattern you want to copy them to and then paste them.
6.2.4

Nudge

Nudge allows you to shift selected events/notes by the Step Grid resolution.
Press SHIFT + pad
►
SHIFT + pad 8 (NUDGE
selected, all event/notes in the Pattern will be affected.
ERASE + the desired pad to progressively delete the
(SHIFT + pad 1,
SHIFT
SHIFT + pad 12 (PASTE).
7 (< NUDGE) to move the selected events/notes to the left, or
>) to move the selected events/notes to the right. If nothing is
SHIFT + pad 2) to get back to where you were
+ pad 11 (COPY)
MASCHINE MIKRO MK2 - Manual - 183
Working with Patterns (Controller)
Editing Patterns