Table of Contents
Advertisement
Tape Mode – Parameter
Warmth
Tone
The Saturator in Tape mode on the controller.
Tube Mode
The Tube mode emulates the smooth saturation of overdriven tube amplifiers. It is equipped
with a feedback-driven dynamic compression and an additional EQ section allowing you to fine
adjust the frequency content to be processed.
The Saturator in Tube mode in the software.
Tube Mode – Parameter
Drive
Amount
Charge
Description
Controls the low frequency boost/cut of the effect.
Controls the high frequency roll-off starting frequency. Frequencies above
this point will be attenuated.
Description
Adjusts the level of the input signal. This directly affects the amount of
tube distortion.
In Tube mode the Saturator provides a negative feedback loop that attenu-
ates the level at the Saturator's input according to the amount of low fre-
quencies at its output. This notably prevents the bass content "polluting"
the saturation. The
Charge
feedback. At
0
(full left) the feedback loop is disabled. Increase the
Charge
value to strengthen the effect. Higher values additionally generate
an interesting compression-like effect.
parameter allows you to adjust the amount of
MASCHINE MIKRO MK2 - Manual - 242
Effect Reference
Distortion Effects
Advertisement
Table of Contents
