Table of Contents
Advertisement
The Gate in the software.
Parameter
Depth
Threshold
Time
Attack
Hold
Release
Output
Mix
The Gate on the controller.
Description
This value determines the threshold at which the Gate starts to work. High-
er values will let only the loudest parts of the signal through the Gate.
Use
Attack
to adjust how fast the Gate reacts to the incoming signal: the
more you dial it to the right, the slower it will react, resulting in a softer
transition between the gated and the not gated parts of the signal.
The
Hold
parameter is used to determine how long the gated signal is held;
lower values will result in a more "choppy" effect.
The time the Gate will take to release the input signal after it rises above
the threshold.
Mix
lets you adjust the amount of the effect in relation to the dry original
audio signal.
MASCHINE MIKRO MK2 - Manual - 214
Effect Reference
Dynamics
Advertisement
Table of Contents
